Promise Technology 150TX2 - Manual (Page 35)

Chapter 2: Getting Started
31
2. Press Ctrl-Y to Save your selection. The window below will appear.
Do you want the disk image to be
duplicated to another or do quick
initialize or create only?
Y - Create and Duplicate
N - Create Only
I - Create and Quick Initiate
Note
Gigabyte Boundary is automatically disabled when creating
a mirrored array (RAID 1) from an existing drive (versus
using two brand new drives). This protects the existing
drive’s partition table in order to maintain data integrity.
3. Press Y for the Create and Duplicate option. The window below will appear
asking you to select the Source drive to use. FastBuild will copy all data
from the Source drive to the Target drive.
Source Disk
Channel:ID Drive Model Capacity (MB)
Target Disk
Channel:ID Drive Model Capacity (MB)
[Please Select A Source Disk]
Channel:ID Drive Model Capacity (MB)
1 : SEAGATE S380023AS 80024
2 : SEAGATE S380023AS 80024
[
↑ ] Up [ ↓ ] [ESC] Exit [Ctrl-Y] Save
4. Press the arrow keys to choose which drive contains the existing data to be
copied.
Warning
All target drive data will be erased. Make sure you choose
the correct drive.