Printek Mobile Thermal MtP300 Series - Manual (Page 32)

Printer Configuration
Discoverability Discoverability
On
Possible Values: Off, On*
This feature is used to set whether the printer may be discovered by other Bluetooth devices.
PIN PIN
0
Possible Values: 0*, Up to 16 Numeric Characters.
Note that this feature is only available if Paring Mode is set to Paired.
To advance through the character positions, press the Advance Button. To change the character at the current
position, press the Increment Button. The characters that may be selected are “0123456789” and SPACE.
Setting a character to SPACE will terminate the value being set.
Security Security
Off
Possible Values: Off*, On
Setting Security to On forces the printer and the remote device to use pairing. Setting Security On requires that
Pairing is set to Paired and that a PIN has been entered that matches the PIN in the remote device.
Local Name Local Name
MtP300-AAANNNNN
Possible Values: MtP300-aaannnnn*,
Up to 16 characters of “0” through “9”, “A” through “Z”, “a” through “z”, “-“, “_”, SPACE
This feature sets the name that will be displayed by most host systems when “discovering” the printer. When
shipped from the factory, the default value for the Bluetooth Local Name is “MtP300-aaannnnn” where
“aaannnnn” is the printer’s serial number. This name may be changed to any combination of letters, numbers,
dashes, underscores, and SPACEs. The name may be up to 16 characters in length.
To advance through the character positions of the name, press the Advance Button. To change the character
at the current position, press the Increment Button. The order of characters that may be selected is
“0123456789 ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz - _ SPACE”.
26