Printek Mobile Thermal MtP300 Series - Manual (Page 59)

Specifications
Media Specifications
Receipt Paper
General Specifications: 0.0022 to 0.0065” (0.056 to 0.089mm) Thick
Black Mark Sensing On Printed Side
2.00 to 3.12” (50.8 to 79.25mm)Wide
0.750” (19.05mm) Inside Diameter Core
2.625” (66.68mm) Maximum Outside Diameter
(Black Mark Sensing On Back Side and Gap Sensing On MtP300 LP Models)
Approved Vendors: Kansaki: P300, P310, P350, P354, P390*, P530UV, TO281CA,
OP200, TO381N, F180, F380, F550
Jujo: TF-50KS-E2C
Honshu: FH65BV-3
*Standard Printek Offering
Labels
MtP300: 0.0022 to 0.0065” (0.056 to 0.089mm) Thick
0.750” Inside Diameter Core
Black Mark Sensing On Printed Side
2.625” Maximum Outside Diameter
3.12” Maximum Width (carrier)
MtP300 LP: 0.0022 to 0.0065” (0.056 to 0.089mm) Thick
0.750” Inside Diameter Core
Black Mark Sensing On Printed Side Or Back Side
Gap Sensing Between Labels
2.625” Maximum Outside Diameter
3.12” Maximum Width (carrier)
53