Planet Technology ADSL VPN/Firewall Router ADW-4200 - Manual (Page 29)

Chapter 3 Configuration
25
The factory default is rfc 1483-0. If your ISP uses the same access protocol, please
click Edit to input other parameters as below. If your ISP does not use rfc 1483-0, you
can delete it by clicking Delete. Then you may click Create to create a connection to
your ISP to surf the Internet. The following page is then shown.
Select one of the access methods among the 5 listed items and click Next to configure
the right connection method. Please refer to the following description and Section 3.5
Information from ISP.
is a shortcut to the Quick Start page.