Planet Technology ADSL VPN/Firewall Router ADW-4200 User Manual
Page 53
Chapter 3 Configuration
49
Username: If you are a Dial-Out user (client), enter the username provided by your
Host. If you are a Dial-In user (server), enter your own username.
Password: If you are a Dial-Out user (client), enter the password provided by your Host.
If you are a Dial-In user (server), enter your own password.
PPP Authentication Type: Default is Auto.
Data Encryption: The data can be encrypted by MPPE algorithm. Default is Auto, it is
negotiated when establishing a connection.
Key Length: The data can be encrypted by MPPE algorithm with 40 bits or 128 bits.
Default is Auto, it is negotiated when establishing a connection.
Mode: You may select Stateful or Stateless mode. The key will be changed in each
256 packets when you select Stateful mode. If you select Stateless mode, the key will
not be changed in each packet.
Idle Time: Auto-disconnect the router when there is no activity on the line for a
predetermined period of time. 0 means this connection is always on.
Click Apply after setting.
3.6.3.5.1.2 PPTP for LAN to LAN
For the LAN to LAN application, please refer to the figure below.
Connection Name: Give a name for this connection.
Type: Check Dial Out to be a client, check Dial In to be a server. When this network
router acts as a client, please input the remote Server IP Address (or Hostname) to
establish a connection. When this network router acts as a server, please input the
Private IP Address Assigned to Dial in User address.
Peer Network IP: Enter Peer network IP address.