Planet Technology ADSL VPN/Firewall Router ADW-4200 - Manual (Page 76)

PLANET ADSL VPN / Firewall Router
72
router are allowed to logon the device and modify data. ]
Expire to auto-logout: Specify a time frame for the system to auto-logout the device.
For Example: User A changes HTTP port number to 100, specified it
’s own IP
address to be 192.168.1.55, and set the logout time to be 50 seconds. Device will
only allow User A which IP address is 192.168.1.55 to logon to the Web GUI by
typing: 192.168.1.254:100. After 50 seconds, the device will automatically logout
User A.
3.6.3.7.4.2 Universal Plug and Play (UPnP)
Disable: Check to disable UPnP function.
Enable: Check to enable UPnP function.
UPnP Port: Its default setting is 2800. It is highly recommended for users to use this
port value. You may wish to modify this port value, only if this value conflicts with
other ports already being used.
3.6.3.7.4.3 SNMP Access Control
Read Community: Specify a name in any string to be identified as the Read
Community and an optional IP address. This community string will be checked
against the string entered in the configuration file. Once the string name is matched,
user with this IP address will be able to view the data.
Write Community: Specify a name in any string to be identified as the Write
Community and an optional IP address. This community string will be checked
against the string entered in the configuration file. Once the string name is matched,
user with this IP address will be able to view and modify the data.
Trap Community: Specify a name in any string to be identified as the Trap
Community and an IP address. This community string will be checked against the
string entered in the configuration file. Once the string name is matched, user with
this IP address will be notified Traps.
Please note SNMP software is required in order to utilize this section.
3.6.4 Save Configuration to Flash
After configuring this network router, you have to save all of the configuration
parameters to FLASH.