Connecting your equipment 03, When making cable connections, About the video converter – Pioneer VSX-2016AV User Manual

Page 12

Advertising
background image

Connecting your equipment

03

12

En

10 Multichannel pre-amplifier outputs

Use to connect separate amplifiers for front, center,
surround, surround back and subwoofer channels.

Connecting additional amplifiers

on page 53 (see also

Installing your speaker system

on page 17 for powered

subwoofer connection).

11 Composite and S-video monitor outputs

Use to connect monitors and TVs.

Connecting your TV and DVD player

on page 13.

12 Multichannel analog audio inputs

7.1 channel inputs for connection to a DVD player with
multichannel analog outputs.

Connecting the multichannel analog inputs

on

page 51.

13 Speaker terminals

Use for connection to the main front, center, surround
and surround back speakers.

Installing your speaker system

on page 17.

When making cable connections

• To avoid hum, do not lay connected cables over the

top of the receiver.

• When connecting optical cables, be careful when

inserting the plug not to damage the shutter
protecting the optical socket.

• When storing optical cable, coil loosely. The cable

may be damaged if bent around sharp corners.

About the video converter

The video converter ensures that all video sources are
output through all of the

MONITOR VIDEO OUT

jacks.

The only exception is HDMI and high-definition
component video: since these resolutions cannot be
downsampled, you must connect your monitor/TV to the
receiver’s HDMI/component video outputs when

connecting these video sources.

1

If several video components are assigned to the same
input function (see

The Input Setup menu

on page 55),

the converter gives priority to HDMI, component, S-video,
then composite (in that order).

• For optimal video performance, THX recommends

switching Digital Video Conversion (in

Setting the AV

options

on page 57)

OFF

.

Note

1 If the video signal does not appear on your TV or plasma display, try adjusting the resolution settings on your component or display. Note that some
components (such as video game units) have resolutions that may not be converted. In this case, use an (analog) S-video or composite connection.

This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
consumer uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is
prohibited.

VSX-2016_HY.book.fm 12 ページ 2006年2月24日 金曜日 午後12時40分

Advertising
This manual is related to the following products: