Panasonic KX-P7305 - Manual (Page 190)

Settings and Printing Network Network Maintenance and Spec.
Setup in Windows
7
The following method [A] or [B] is the steps to set up an LPR Port printing using TCP/IP in
Windows.
[A] Printing directly from a computer ( see page 8 )
Step 1: Setting up TCP/IP on the computer
Step 2: Setting up TCP/IP on the printer
Step 3: Setting up the printer driver and the printer port on the computer
Step 4: Setting up another computer
[B] Printing through the shared computer (print server) ( see page 21 )
Step 1: Setting up TCP/IP on the computer
Step 2: Setting up TCP/IP on the printer
Step 3: Setting up the printer driver and the printer port on the server computer
Step 4: Setting up the client computer
CAUTION
• To set up printing with the above method [B], File and Print Sharing… service should be
installed in Windows 95, Windows 98, Windows Me. If the service is not installed, install it as
follows before starting the setup.
(1) Click [Start], select Settings and click Control Panel.
(2) Double click the Network icon.
(3) Click [File and Print Sharing...].
(4) Confirm I want to be able to give others access to my files and I want to be able to
allow others to print to my printer(s) check box are checked.
If the check mark is removed, click the check box.
(5) Click [OK].
(6) Click [OK].
(7) If the setting is changed, restart Windows.
LPR Port Printing using TCP/IP in Windows