Panasonic KX-P7305 - Manual (Page 55)

Setting the Printer Driver
Macintosh Basics Windows Windows 50
The media can be fed from the tray corresponding to the paper size of the document by
assigning the media size to the tray.
AutoSelect Tray must be selected for paper source to use the feature.
The setting of the Remote Control Panel will be taken over by the setting of the printer driver.
■ Using the Remote Control Panel
1
Click [Start], move the pointer to Programs or All Programs, Panasonic
and Panasonic KX-P7305 and KX-P7310, then click Remote Control
Panel.
• If more than one printer is connected to your computer, the screen prompts to select
the printer. Click the desired printer, then click [OK] .
2
Click the + button on the Paper menu from the tree menu.
Or
Double click the Paper menu.
3
Click the Upper Tray or Lower Tray menu.
• If the optional 2nd feeder is installed, these menus are displayed.
4
Click the ! button to display the pull down list and click the desired media
size.
5
Click Tool menu and select Send to transfer the changed setting to the
printer.
Setting the Form To Tray Assignment