Planet Technology ADW-4401 A/B - Manual (Page 10)

WLAN Flashing When wireless AP is ready
ON Link
Flashing TX or RX activity
LAN
1-4
OFF
No Link
These four LAN (Local Area Network) ports are where you
will connect networked devices, such as PCs, print servers
remote hard drives, and anything else you want to put on your
network
Rear Panel
Rear panel Port and Button Definition
Connector Description
POWER Power connector with 9V DC 1.5 A
Reset The reset button, the router restore the default settings when press this
Switch button until reboot
L
Router is successfully connec through the corresponding
AN (1-4)
ted to a device
port (1, 2, 3, or 4). If the LED is flashing, the Router is actively sending
or receiving data over that port.
ADSL
Connector
The RJ-11 connector allows data communication between the modem
and the ADSL network through a twisted-pair phone wire
10