Planet Technology ADW-4401 A/B - Manual (Page 27)

3.6.1 LAN Configuration
Go to Interface Setup -> LAN. The 'LAN Settings' option enables you to configure
the LAN port.
If the DHCP Relay is selected, the DHCP requests from local PCs are forward to the
DHCP server runs on WAN side. To have this function working properly,
disable the NAT to run on router mode only, disable the DHCP server on the LAN
port, and make sure the routing table has the correct routing entry.
3.7.1 Wireless Settings
Go to Interface -> Wireless to setup the wireless parameters.
SSID
SSID is the identifier for the network. You can change the SSID. Only devices with
the same SSID can interconnect.
Channel ID
The channel number is used for wireless networking. The channel setting of the
wireless devices within a network should be the same.
27