Installation, 1 system requirement, 2 hardware installation – Planet Technology ADW-4401 A/B User Manual
Page 11: 3 configuration, 1 determine your connection settings, 2 connecting the adsl router to your network
2. Installation
mation about installing your router. If you are not familiar with
the hardware or software parameters presented here, please consult your service
.1 System Requirement
2. Pentium II 233 MHz processor minimum
.2 Hardware Installation
nect and configure the ADW-4401.
This chapter offers infor
provider for the values needed.
2
1. Personal computer (PC)
3. 32 MB RAM minimum
4. 20 MB of free disk space minimum
2
This section describes how to con
tep 1. Connect the ADSL Line
onnect the router directly to the wall jack using the included ADSL cable.
here are two methods to connect the router and workstation. The one use the crossover
e straight Ethernet cable
Power
To PC /
Hub
To ADSL
Line
Adapter
S
C
Step 2. Connect a Workstation to the Router's LAN port
T
Ethernet cable to connect directly between them. The other us
to connect router with hub (or switch), then go to the workstation.
11