Panasonic DMC-FX7GN - Manual (Page 81)

Playback (advanced)
81
Playing Back Pictures on a TV Screen
The procedure for DMC-FX7 is described
below. In the case of DMC-FX2, connect
the TV and the [V. OUT] terminal on the
camera with the video cable (supplied).
∫ Playing back pictures with the
supplied cable
• Turn the camera and the TV off.
1 Connect the AV cable A
(supplied) to the [AV OUT] socket
of the camera.
• Connect the AV cable with the [ ]
mark facing the [ 1] mark on the
[AV OUT] socket.
• Hold on the plug body B and push in to
the socket.
2 Connect the AV cable to the video
input and the audio input sockets
of the TV.
• 1 Yellow: to the video input socket
• 2 White: to the audio input socket
3 Turn the TV on and select external
input.
4 Turn the camera on and then set
the mode dial to playback mode
[
].
∫ Viewing pictures in other countries
When setting [VIDEO OUT] on the menu,
you can view images on the TV which use
the NTSC or PAL system.
∫ Playback pictures on TV with SD
Memory Card slot
A recorded SD Memory Card can be
played back on TVs with an SD Memory
Card slot.
If you play back pictures recorded using
[HDTV] mode on a High-Definition TV,
(HDTV has 16:9 aspect) the picture quality
will be better.
• Do not use any other AV cables except the
supplied one.
• Read the TV operating instructions too.
• You can display pictures on a TV only
when the mode dial is set to playback
mode [
].
• Audio playback is in mono.
DIGITAL
AV OUT
DC IN
1
A
FX2_7-GN.book 81 ページ ２００４年８月２日 月曜日 午後３時４０分