Panasonic DMC-FX7GN - Manual (Page 82)

Connecting to a PC or Printer
82
Connecting to a PC or Printer
Before Connecting with USB Connection Cable
[ : USB MODE]
Select the USB communication system according to the OS of your PC or your printer
before connecting them to the camera with the USB connection cable (supplied).
Set the items on [USB MODE] in the [SETUP] menu. (P21)
1 Select [USB MODE]. 2 Select [PC] or [PictBridge (PTP)].
• When [PC] is selected, the camera is connected via USB Mass Storage communication
system.
• When [PictBridge (PTP)] is selected, the camera is connected via PTP (Picture Transfer
Protocol) communication system.
MENU
SETUP 2 /
3
SELECT EXIT MENU
CLOCK SET
NO.RESET
RESET
PC
VIDEO OUT PAL
USB MODE
USB MODE
SELECT SET
PictBridge
(PTP)
PC
Devices to be connected
Setting on the
USB mode
PC/OS
Windows
®
2000 Professional, Windows Me,
Windows 98/98 SE or Mac OS X (10.1 or above),
Mac OS 9.x
[PC]
Windows XP Home Edition, Windows XP
Professional or Mac OS X [PC] or [PictBridge
(PTP)]
Printer Printers supporting PictBridge [PictBridge (PTP)]
FX2_7-GN.book 82 ページ ２００４年８月２日 月曜日 午後３時４０分