Philco Crafts PVD1000 - Manual (Page 7)

-7- EN
Hint
• The audio source on a disc in a Dolby Digital Multi-channel
Surround format cannot be recorded as digital sound by an MD
or DAT deck.
• By hooking this unit up to a Multi-channel Dolby Digital decoder,
you can enjoy high-quality Dolby Digital Multi-channel Surround
sound as heard in the movie theaters.
• Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
L R
AUDIO OUT
L
R
Stereo system
COAXIAL
DIGITAL
AUDIO OUT
COAXIAL
AUDIO
This unit
Playing 2 channel audio
Analog audio
input jacks
Digital audio
input jack
AUDIO OUT
(Analog) DIGITAL
AUDIO OUT
Playing Dolby Digital
(Multi-channel audio)
Audio cable
(supplied)
Audio Coaxial
Digital cable
(commercially
available)
Dolby Digital decoder,
MD deck or DAT deck
Hint
• Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
Connection to an Audio System
Rear Terminals
AUDIO OUT
L
R
DIGITAL
AUDIO OUT
COAXIAL VIDEO
OUT
S-VIDEO
OUT
AUDIO OUT (analog) jacks
Connect the supplied audio cable (red/white) here through the
audio in jacks of a TV or other audio equipment.
S-VIDEO OUT jack
Connect an optional S-Video cable here through the S-video in
jack of a TV.
VIDEO OUT jack
Connect the supplied video cable (yellow) here through the video
in jack of a TV.
DIGITAL AUDIO OUT COAXIAL jack
Connect an optional coaxial digital audio cable here through the
coaxial digital audio in jack of a decoder or audio receiver.
Setup
* To complete these settings, refer to pages 14-15.
SETUP > QUICK>
DOLBY DIGITAL
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
BITSTREAM
Connecting to other equipment
(an MD deck or DAT deck etc.)
without Dolby Digital decoder.
PCM
Connection
Setting
E6C61UD.indd 7 E6C61UD.indd 7 2006/08/18 13:00:24 2006/08/18 13:00:24