Philco Crafts PVD1000 - Manual (Page 9)

-9- EN
STANDBY-ON
AUDIO
SUBTITLE
ANGLE
REPEAT CLEAR
A-B PAUSE
SLOW
SKIP
OPEN/CLOSE
DISPLAY SEARCH MODE
1 2 3
4 5 6
7 8 9
0 +10
PLAY
REV FWD
STOP
Resume
Press [STOP C] during playback. Resume
message will appear on the TV screen.
Press [PLAY B], playback will resume from
the point at which playback was stopped.
Slow Forward / Reverse
Press [FWD g] or [REV h] repeatedly in
the pause mode to select the required forward or
reverse speed.
To continue playback, press [PLAY B].
Paused and Step-by-Step Playback
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
The disc goes forward by one frame each time [PAUSE F]
is pressed in the pause mode.
To continue playback, press [PLAY B].
Hint
• Slow forward or reverse speed is different depending on the disc.
Approximate speed is 1(1/16), 2(1/8) and 3(1/2).
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in
the slow playback mode are blurred. (Refer to pages 14-15.)
• Only slow forward is available when playing a Video CD.
Fast Forward / Reverse Search
Use [FWD g] or [REV h] repeatedly
during playback to select the required forward or
reverse speed.
To continue playback, press [PLAY B].
Before: Turn on the TV, amplifier and any other equipment which
are connected to this unit. Make sure the TV and audio receiver
(commercially available) are set to the correct channel.
Functions
Canceling and Calling Back PBC Function
1) Insert a Video CD and press [STOP C].
2) Press the Number buttons to enter the desired Track number.
• PBC function is now canceled and the playback of the Video CD will start.
3) To call back PBC function, press [STOP C] twice, and then press [PLAY B].
• The title menu will appear on the display.
DVD menu
Some discs contain menus which allow you to customize
DVD playback. Use [K / L / s / B] to select an item, then
press [ENTER] (or [PLAY B]).
Calling Up a Menu Screen during Playback
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
1
E 1
Hint
• A “prohibited icon” may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit.
• Some DVDs may start playback from title 2 or 3 due to specific programs.
• The operation may vary when you playback DVDs with disc menu or Video CDs with PBC. Refer to the manual accompanying the disc for details.
• During the playback of a two-layered disc, pictures may stop for a moment. This happens while the 1st
layer is being switched to the 2nd layer. This is not a malfunction.
Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.
Playback
Hint
• On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if
pictures in the pause mode are blurred. (Refer to pages 14-15.)
IR SENSOR
STANDBY-ON STOP PLAY OPEN/CLOSE
4 1
TIP: You can change the On-Screen language in “PLAYER MENU” setting. (Refer to page 14.)
Hint
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for more details.
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Resume ON
Hint
• To cancel resume, press [STOP C] one more time in the stop mode.
• The resume information will be kept even when unit is in standby mode.
• Some Video CDs with the PBC function resume playback from the beginning of the track.
Hint
• For DVDs, fast forward or reverse search speed is different depending on
the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50) and 5(x100).
• For Audio CDs, Video CDs approximate speed is 1(x2), 2(x8) and 3(x30).
Lights up when power is on.
Hint
• Zooming function does not work while the disc menu is displayed.
• x4 zoom is not available on some discs.
• The picture may be distorted when you press [PAUSE k] or
[REV h] repeatedly in the zoom mode.
• In the zoom mode, it automatically changes x2(x4) to the
zoomed position guide.
• Only x2 zoom is available on Video CDs.
Functions
Zoom
1) Press [ZOOM] repeatedly during playback to select the
required zoom factor: x2, x4 or OFF.
x2 x4
2) Use [K / L / s / B] to slide the zoomed picture across
the screen.
3) To exit zoom function, press [ZOOM] repeatedly to select OFF.
1 Press [STANDBY-ON] to turn on the DVD/CD Player.
2 Press [OPEN / CLOSE A] and insert a disc with label facing up.
3 Press [PLAY B ] to start playback.
4 Press [STOP C ] to stop playback.
3 2 2
2
2
1
3
4
E6C61UD.indd 9 E6C61UD.indd 9 2006/08/18 13:00:27 2006/08/18 13:00:27