Paradyne 24-Port SHDSL Mini DSLAM SMD2000-24T - Manual (Page 21)

21
LNK
(10/100
Ethernet
Manage-
ment
Link) Flashing
green 100 Mbps management
connection is established
and active Traffic is flowing at 100
Mbps.
Solid green 100 Mbps management
connection is established No current traffic flow.
Flashing
amber 10 Mbps management
connection is established
and active Traffic is flowing at 10 Mbps.
Solid
amber 10 Mbps management
connection is established No current traffic flow.
No
illumination No management connection NOTE: The LNK LED
pertains only to direct
connections between the
SMD2000-24T and your PC;
it does not pertain to remote
network access of the
SMD2000-24T.
LK: T1
Uplink
Port 1
and 2 Flashing
green T1 uplink connection is
established and active The uplink port has received
valid data from the remote
T1 provider equipment
within the last second.
Solid green T1 uplink connection is
established A T1 uplink connection
exists and the port may be
transmitting but it has not
received any data from the
remote T1 provider
equipment within the last
second.
No
illumination Red Alarm: The T1 uplink's
incoming connection has
been lost; no data is being
received. If the T1 uplink's outgoing
connection has also been
lost then the remote T1
provider equipment is in Red
Alarm as well.
Table 9. LEDs (2 of 3)
State Indication Additional Information