Paradyne 24-Port SHDSL Mini DSLAM SMD2000-24T - Manual (Page 7)

7
5. Secure the faceplate. Using a Phillips screwdriver, secure the UIM faceplate to
the SMD2000-24T faceplate with the two flathead screws included in your UIM
packaging.
6. Replace the chassis cover. Replace the chassis cover and secure with the
original eight flathead screws as depicted in Step 1 on page 5.
Tabletop Installation
Procedure
To install the SMD2000-24T on a table, desk, shelf, or remote cabinet:
1. Affix the four provided rubber pads to the bottom of the chassis for surface grip.
2. Place the SMD2000-24T such that the cables will not become a tripping hazard or
pull loose from the chassis. Ensure that the air supply vents on the sides of the
chassis are not blocked.
Bottom of Chassis