Pioneer Drive r11 - Manual (Page 39)

R11 Series Drive Command Reference Manual Version 1.00
+R (2.4x) #1
DVD 2.4x CLV
2.4*1385 = 3324 (CFCh)
DVD 2.4x CLV
2.4*1385 = 3324 (CFCh)
#1
DVD 8x CLV
8*1385 = 11080
(2B48h)
DVD 8x CLV
8*1385 = 11080
(2B48h)
#2
DVD 6x CLV
6*1385 = 8310 (2076h)
DVD 6x CLV
6*1385 = 8310 (2076h)
#3
DVD 4x CLV
4*1385 = 5540 (15A4h)
DVD 4x CLV
4*1385 = 5540 (15A4h)
+R DL(2.4x)
#4
Last Possible Lead-
out Start LBA -1
DVD 2.4x CLV
2.4*1385 = 3324 (CFCh)
DVD 2.4x CLV
2.4*1385 = 3324 (CFCh)
#1
DVD 8x CLV
8*1385 = 11080
(2B48h)
DVD 8x CLV
8*1385 = 11080
(2B48h)
#2
DVD 6x CLV
6*1385 = 8310 (2076h)
DVD 6x CLV
6*1385 = 8310 (2076h)
+RW (8x)
#3
DVD 3.3x CLV
3.3*1385 = 4570
(11DAh)
DVD 3.3x CLV
3.3*1385 = 4570
(11DAh)
#1
DVD 4x CLV
4*1385 = 5540 (15A4h)
DVD 4x CLV
4*1385 = 5540 (15A4h)
+RW (4x)
#2
DVD 2.4x CLV
2.4*1385 = 3324 (CFCh)
DVD 2.4x CLV
2.4*1385 = 3324 (CFCh)
+RW (2.4x) #1
Outermost Lead-out
Start LBA in ADIP -
1
DVD 2.4x CLV
2.4*1385 = 3324 (CFCh)
DVD 2.4x CLV
2.4*1385 = 3324 (CFCh)
Notes : For +R DL media, the Last Possible Lead-out Start LBA is set as follows.
1) In case of the disc which has no complete status, it is set to the following value.
The value = ( L0 Data Zone Capacity + 1 – 30000h ) x 2 – Extended Partial Lead-out Size
As for the L0 Data Zone Capacity,
if it has not been changed from the default value, it is set to the Last Possible Physical Sector of the Data
Zone on Layer 0 in ADIP,
and if it has been changed from the default value, it is set to the Actual last PSN of Data Zone on Layer 0
in TOC.
As for the Extended Partial Lead-out Size,
if the disc has an Extended Partial Lead-out, it is 30000h,
and if the disc has no Extended Partial Lead-out, it is 0.
2) In case of the disc which has a complete status, it is set to the Actual Lead-out Start LBA.
Page 38