26 send disc structure command, 27 set cd speed command – Pioneer Drive r11 User Manual

Page 52

Advertising
background image

R11 Series Drive Command Reference Manual Version 1.00

4.26 SEND DISC STRUCTURE Command

The Format field indicates the type of information that is sent to the device.

Table 35 - Format Code definitions for SEND DISC STRUCTURE Command

Format Code

Data

Description

04h

User Specific Data

Send User Specific Data to the RMD cache

05h Copyright

Management

Information

Send CPR_MAI

0Fh

Timestamp

Send data to the RMD cache

20h

L0 Data Zone Capacity

Send L0 data zone capacity for +R DL

21h

Shifted Middle Area Start

Address

Send the Start Logical Block Address of the Shifted

Middle Area on Layer 0

22h

Regular Interval Layer Jump

Size

Send the Interval Size of Layer Jump

23h

Manual Layer Jump Address

Send Logical Block Address for Layer Jump on Layer 0

24h

Remapping Address

Send Logical Block Address for Remapping anchor point

C0h

Write Protection

Send PWP status

If the Layer Jump Recording has not been supported, the Format Code 21h to 24h are not supported.

The Format Code 20h does not work for DVD-R DL disc.

The Format Code 21h to 24h does not work for +R DL disc.

4.27 SET CD SPEED Command

The drive can not specify the reading speed by any Packet command. The setting of Logical Unit Read
Speed field is ignored. The reading speed is determined by the drive.

This command changes the writing speed for CD-R/RW media. It does not effect to the writing speed for
DVD-R/-RW/RAM and +R/+RW/+R DL media.

The available writing speed may be restricted by the drive when the characteristic of media is not suitable
for the speed.

Table 36 – Available Writing speed for each media

Media

Available Writing Speed

Comments

CD-R

40x CAV, 32x ZCLV/PVAV,

24x ZCLV/PCAV, 16x CLV,

10x CLV, 4x CLV

CD-RW (1 - 4x)

4x CLV

CD-RW High Speed 10x CLV, 4x CLV

CD-RW Ultra

Speed

24x ZCLV, 20x ZCLV, 16x CLV,

10x CLV

CD-RW Ultra

Speed+

32x ZCLV, 24x ZCLV, 20x ZCLV,

16x CLV, 10x CLV

Table 37 – Parameters to set Writing speed for CD-R/RW

Logical Unit

Writing Speed

CD-R Writing

Speed

CD-RW Writing

Speed

DVD-R/-RW and

+R/+RW

Writing Speed

0000h – 06E3h

4x CLV

4x CLV

06E4h – 0B05h

10x CLV

10x CLV

0B06h – 0DC7h

16x CLV

0DC8h – 1088h

16x CLV

20x ZCLV

1089h – 160Bh

24x ZCLV/PCAV

24x ZCLV

160Ch – 1B8Fh

32x ZCLV/PCAV

1B90h – FFFFh

40x CAV

32x ZCLV

Remains previous

setting

Page 51

Advertising