Panasonic MC-V5003 - Manual (Page 11)

- 11 - - 30 -
+ Hose
Manguera
Tuyau
Removing Clogs
Voltaje Protector de motor Extensión de cordón Herramientas
9.1 A / 9,1 A Si 6,1 m (20 pi) Si
Power Motor Protector Cord Length Tools
120V AC(60Hz) Yes 6.1 m (20 Ft.) Yes
Alimentation Protecteur du moteur Longueur du cordon Accessoires
120V c.a. (60Hz) Oui 6,1 m (20 pi) Oui
FEATURE CHART
Diagrama de características
Tableau des caractéristiques For best cleaning results, keep the airflow
passage clear.
➢ ➢ Unplug vacuum.
➢ ➢ Check each starred area occasionally
for clogs.
➢ ➢ Disconnect the hose from the nozzle
hose and check the hose for clogging.
➢ ➢ Inspect hose end and clear any
obstructions.
➢ ➢ Reinstall hose and lower plate.
➢ ➢ While running the vacuum cleaner with
the hose disconnected, stretch the
hose in and out to remove the clog.
➢ ➢ If the clog still exists, turn the vacuum
OFF and unplug the power cord.
➢ ➢ Turn the vacuum cleaner over,
exposing the underside.
➢ ➢ Remove the lower plate. Remove the
short nozzle hose from the housing by
lifting it straight up.
➢ ➢ Inspect the hose end and clear it of
any obstructions. Reinstall the short
nozzle hose and lower plate.
Electrical Shock Or Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so
could result in electrical shock or personal injury from cleaner suddenly starting.
WARNING