Pelco TLR3040 - Manual (Page 48)

48 Pelco Manual C671M (1/01)
ADJUSTING PICTURE QUALITY
This control lets you adjust the playback picture so the outline is sharper or softer. It is only
effective during playback. During playback, turn the PICTURE control right for sharper or
left for softer.
00298
PICTURE
SOFT SHARP
SOFT SHARP
Figure 25. Picture Quality Adjustment
VERTICAL (VIBRATION) ADJUSTMENT
The VERTICAL ADJUST (+/-) buttons will not correct horizontal vibration. Also, they will not
work when QUASI V-SYNC in the First Time Set Up menu is set OFF.
• If the picture vibrates when watching still, slow motion, fast playback, or normal
playback in L24H or L40H mode:
1. Press PAUSE during playback.
2. Press the VERTICAL ADJUST (+/-) buttons to reduce or eliminate picture vibration.
• To reset vertical adjustment:
Press both the VERTICAL ADJUST (+/-) buttons together during still picture, forward
or reverse slow playback, or playback in L24H or L40H mode.
Figure 26. Vertical Picture (Vibration) Adjustment
SEARCH TECHNIQUES
COUNTER MEMORY STOP
This feature rewinds a tape until the counter on the fluorescent display reaches 00000 and
stops. (NOTE:
When the counter indicates 00000, COUNTER MEMORY STOP on the
Search Function menu cannot be selected. )
1. Press the SEARCH button once. The Search Function menu appears with COUNTER
MEMORY STOP highlighted. The COUNTER MEMORY STOP indicator (M) on the
fluorescent display lights.
To exit the Search Function menu without rewinding, press STOP.
2. Turn the SHUTTLE ring right. The VCR starts rewinding the tape.
3. Press STOP to quit rewinding.
00299
POSITION/
VERTICAL
ADJUST
WHEN THE PICTURE
IS VIBRATING