Piega Thermo Check for Windows 1.6 User Manual
Page 6
Page 2
To use the ThermoCheck you will need to install the ThermoCheck software (please refer to Chapter
2, Installing the Software for more information about installing the software) onto a computer so that
a ThermoCheck can be configured.
To configure a ThermoCheck so that it will be able to take readings a Database will need to be
uploaded in to the ThermoCheck (please refer to Chapter 3, Setting Up a Database for further
information about creating and uploading a Database to a ThermoCheck). To configure a
ThermoCheck so that it records the user (or operator) that recorded the reading along with the
reading, a User List will need to be created and uploaded into the ThermoCheck. A User List can be
uploaded to a ThermoCheck before, after or at the same time as the Database is uploaded to the
ThermoCheck (please refer to Chapter 4, Setting Up a User List, for further information about
creating and uploading a user list to a ThermoCheck).
Once a Database and the optional user list has been uploaded to a ThermoCheck, the ThermoCheck
is ready to record readings (please refer to Chapter 6, Using the ThermoCheck, for further
information about recording readings with a ThermoCheck).
After one or more users have recorded readings, the readings can be downloaded to the computer
with the ThermoCheck software so that the readings can be viewed and analysed (please refer to
Chapter 7, Accessing Data Stored in the ThermoCheck, for further information about recording
readings with a ThermoCheck).