Panasonic DMC-LC20PP - Manual (Page 12)

12
Inserting the Battery
[Preparation]
• Set the power switch to [OFF].
1
Open the memory card door.
2
Slide the battery door and open it.
• Be sure to open the memory card
door.
3
Insert batteries.
• Insert batteries observing the
direction of the + and - polarities.
4
Close the battery door and the
memory card door and close them
until they will clicks.
• If you do not use the camera for a long
time, remove batteries. (When you insert
batteries again, set the date)
• When you remove batteries from the
camera, before removing set the power
switch to [OFF].
• When the card is being read, do not open
the battery door or the memory card door
because the card data may be deleted.
• Use Panasonic AA Ni-MH (nickel-metal
hydride) Batteries.
• Do not mix new batteries and old
batteries.
- - - - - - - - - - - - - - - - - - - -
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer’s
instructions.
- - - - - - - - - - - - - - - - - - - -
1
2
3
4