Panasonic DMC-LC20PP - Manual (Page 36)

36
Changing the Quality
(Data Compression Ratio)
You can choose among 2 quality levels
(Data Compression Ratio).
[Preparation]
• Set the mode dial. (P23)
1
Press the [MENU] button.
2
Press 3/4 to select [QUALITY].
3
Press 2/1 to select the quality
(Data Compression Ratio).
: Fine (Low compression)
It gives priority to picture quality and
records high quality pictures.
: Standard
(Standard compression)
It gives priority to the number of
recordable pictures and records
standard quality pictures.
A: Quality and number of recordable
pictures
(
a Picture size, b Quality)
• The number of recordable pictures
corresponds to the capacity of the
supplied 8MB SD Memory Card. (If
you mix fine quality and standard
quality or the number of pictures you
can take varies according to the
object you have taken)
4
Press the [MENU] button.
• The menu will disappear.
• In motion image mode [ ], quality cannot be modified.
• Due to the characteristics of JPEG compression pictures recorded in standard
mode may contain mosaic noise depending on the subjects you photographed.
• Remaining frame number which is displayed on the LCD monitor may not
correspond with the number of frames you can actually take. However, this is
not a malfunction.
1,4 2,3
2,3
QUALITY
W. BALANCE
PICT. SIZE
SENSITIVITY
D. ZOOM
1600
8 12
18 33
41 66