Panasonic DMC-LC20PP - Manual (Page 57)

57
Formatting the Card
Usually, it is not necessary to format
(initialize) the memory card. Format the
card when this message is displayed on
the LCD monitor “MEMORY CARD
ERROR”.
[Preparation]
• Set the mode dial to playback [ ].
1
Press the [MENU] button.
2
Press 3/4 to select [DELETE] and
then press 1.
3
Press 3/4 to select [FORMAT]
and then press 1.
4
Press 2/1 to select [FORMAT] and
then press the [REVIEW/SET]
button.
• The card is formatted.
• After formatting, recorded images
and any other data cannot be
recovered.
• When the card is formatted on a PC or
other equipment, format the card on the
camera again.
• If the card cannot be formatted, consult
your dealer or servicentre.
• During formatting, do not turn the power
off. It may cause a malfunction.
1 2,3,4
2
DELETE
DELETE
PROTECT
DPOF
SLIDE SHOW
CANCEL
DELETE
SELECT
ALL
FORMAT
3