Using the sound field control 21, Using the sound field control, Digital signal processor – Pioneer AXM-P7650 User Manual

Page 21: Operating the dsp details menu

Advertising
background image

Operating the DSP details menu

1 2 3

4 5 6

1 Front left speaker

2 Center speaker

3 Front right speaker

4 Rear left speaker

5 Subwoofer

6 Rear right speaker

% Press p and hold until SP Set appears

in the display, then press p to display the

DSP function names.

After SP Set is displayed, press p repeat-

edly, the following DSP functions appear in

the display:

SP Set (speaker setting)C.Over (cross-over

frequency)SP Lev (speaker output level)

T Tone (test tone)TA MODE (time align-

ment mode)Time A (time alignment adjust-

ment)AUTO EQ (auto-equalizer on/off)

PEQ (3-band parametric equalizer)

# When neither F/L nor F/R is selected in Posi,
you cannot switch to Time A.
# When neither CUSTOM1 nor CUSTOM2 is se-
lected as an equalizer curve, you cannot switch
to PEQ.
# To return to the display of each source, press
BAND.

Using the sound field control

The SFC function creates the sensation of a

live performance.

! The acoustics of different performance en-

vironments are not the same and depend

on the extent and contour of space through

which sound waves move and on how

sounds bounce off the stage, walls, floors

and ceilings. At a live performance you

hear music in three stages: direct sound,

early reflections, and late reflections, or re-

verberations. Those factors are programed

into the SFC circuitry to recreate the acous-

tics of various performance settings.

% Press SFC to select the desired SFC

mode.

Press SFC repeatedly to switch between the

following mode:

Musical (musical)Drama (drama)Action

(action)Jazz (jazz)Hall (hall)Club (club)

OFF (off)

Note

If the source is a 2-channel LPCM audio or a 2-
channel Dolby Digital audio and you select SFC
effects that are most applicable for 5.1-channel
audio (i.e., Musical, Drama or Action), we re-
commend turning Dolby Pro Logic B on. On the
other hand, when selecting SFC effects that are
intended for use with 2-channel audio (i.e., Jazz,
Hall or Club), we recommend turning Dolby Pro
Logic B off.

Digital Signal Processor

En

21

English

Section

07

Advertising