Pioneer DVR-650H-S - Manual (Page 40)

Recording 05
40
En
7 Move the cursor to the
recording end time on the grid.
As you move the cursor around the grid, an
arrow stretches from the start time to the
current cursor position, representing the
length of the recording. A recording of up to
six hours can be set.
8 Set the end time.
9 Select ‘Yes’ to set the timer
recording and exit, or ‘No’ to go back to
the Easy Timer Recording screen.
• You can check the timer recording
details you just set from the main timer
recording screen (see
Setting a manual
timer recording on page 42).
Timer recording using the VCR Plus+
programming system
This system makes programming timer
recordings very simple. Most TV guides
publish PlusCode programming numbers
with their programme details. If you want to
make a timer recording of a programme, you
just input the corresponding code. The date,
start, stop and channel settings are made
automatically. All you have to do is tell the
recorder the recording mode, and whether
it’s a once-only recording or a regular
recording.
Note that if the country setting is incorrect
(set in the Setup Navigator), timer
recordings made using the PlusCode
programming system may not work as
expected.
1 Press ‘VCR Plus+’ to display the VCR
Plus+ programme screen.
You can also access this screen from the
Home Menu (press
HOME MENU , select
Timer Recording , then VCR Plus+ system ).
• Use the number buttons to enter the
PlusCode programming number. (To
clear the last digit entered, press
CLEAR .)
• You can also use the / / /
buttons to select digits from the on-
screen display.
2 After making the settings, select
‘Enter’ and press ENTER.
The timer recording screen appears with the
timer programme you just set.
3 Confirm that the settings are correct.
If the channel number isn’t displayed, use
the
/ buttons to highlight CH , then use
the / buttons to set the correct channel
number.
• If the channel number is set, but
incorrectly, set up the guide channel
(see
VCR Plus+ CH Setting on page 106).
4 Select ‘Store Programme’ to finish.
• Other options in the same menu panel
allow you to name the programme, and
change the recording destination and/or
recording mode.
Easy Timer Recording
7ch
1/01
MON
11:45
SP REC MODE
11:00 12:00 13:00 14:00 15:00 16:00 17:00
– 13:45
1/01
2/01
3/01
Recording start time
Recording end time
HDD HDD/DVD
ENTER
PlusCode#
1 3
4 5 6
7 8 9
0 Clear Enter
Details
Cancel
2
DVR650HS_TDR_EN.book 40 ページ ２００７年４月９日 月曜日 午後１２時１０分