Palsonic PDP4200 - Manual (Page 17)

BOTTOM VIEW
CONTROL DVI D-SUB COMPONENT INPUT 1 COMPONENT INPUT 2 AV OUTPUT AV INPUT HEADPHONE RF SVHS
Connections
(continued)
16
DVI
cable
How to connect:
Connect a VGA (or DVI) cable between the VGA (or DVI) jack on the PC and the VGA (or DVI) input jack on the unit.
Connect an Audio cable between the AUDIO output on the PC and AUDIO input jack on the unit.
Note:
In order to use the sound input for component video playback you will require a Stereo 9mm adapter.
To Watch the PC screen
1. Turn on your PDP TV, press SOURCE button on the remote
control.
2. Press VOL+/- to select A (VGA) or D (DVI).
3. Press ENTER to confirm.
4. Turn on your PC and check for PC system requirements.
5. Adjust the PC screen.
VGA
cable
or
Audio
cable
Connect a PC
PC
VGA
source A D H1 H2 C1 C2 AV TV