Palsonic PDP4200 User Manual

Page 20

Advertising

Memorising the Channels

Your PDP TV can memorise and store all of the available channels. After the available channels are memorised,
use CH to scan through the available stations.

Storing Channels in Memory Automatically

Press MENU to display the menu main page.

Press VOL+/- repeatedly to display options menu page.

Press CH to select tv tuner item.

Press VOL+ or ENTER to access the submenu.
If the search menu does not appear on the screen, press
VOL+/- to select search menu page

Press CH twice to select autoset item.

Press ENTER to store channels in memory automatically.
The unit will begin memorising all of the available channels.

Note:
The process of auto memory will be stopped if you press the MENU
button. After the process of auto memory, the auto fine tune item will
be set to on automatically.
Before you start auto channel memory, please refer to [Setting colour
and Sound System] on page 25 to select a proper sound system according
to your area.

Manual Search

Use Manual Search if desired channels cannot be memorised or if you would like to store channels to specific
channel numbers one by one.

Press CH repeatedly to select manual search item.

Press VOL+/- to start manual search.

Repeat steps 1~4 in [Storing Channels in Memory
Automatically] to display search menu page.

Pressing VOL+, the set searches towards higher frequency;
Pressing VOL-, the set searches towards lower frequency;
The search stops when a program is found and this program will
be stored in current channel.

options

select to activate tuner menu

tv tuner

select to activate manual search

<select> to enable

off

manual search

channel skip

fine tune

auto fine tune

autoset

select to activate autoset

off