Palsonic PDP4200 - Manual (Page 25)

Setting Picture
24
Customising the Picture
Press MENU to display the menu main page.
If the picture menu does not display, press VOL+/- repeatedly
to display picture menu page.
Press CH to select the item you wish to change.
Press VOL+/- to adjust the value of the item.
Press MENU to exit.
Note:
The tint function is for NTSC only.
Using the Preset Picture Mode
Press P.M to display picture mode select menu.
Press VOL+/- to select a desired picture mode.
Press MENU to exit.
There are three preset picture modes (Normal, Bright and Soft)
and one user-set picture mode (User).
Each preset mode has its own picture settings.
Normal: Select for a normal picture.
Bright: Select for a bright picture.
Soft: Select for a fine/soft picture.
Adjusted settings are stored in User mode.
3
2
1
4
3
2
1
down for picture settings for current window
picture
tint
colour
sharpness
contrast
brightness 50
50
50
50
12
menu to return right/left to adjust
Picture mode Normal