Panasonic M2616 - Manual (Page 42)

36
To talk privately to the party on the
Loudspeaker:
Use the handset on the Loudspeaker (if
provided).
While the Loudspeaker is active, any other
call is maintained on the handset. More
than one call can be put on hold, but only
one call at a time can be placed on the
Loudspeaker.
To use On Hold On Loudspeaker on
the Speech Monitor:
∫ Hot Line
1. Make a call from Hot DN or the DN of
the Speech Monitor.
˙ 2. Place the call on Hold . The Speech
Monitor is automatically activated.
To talk privately to one of the parties
on the Speech Monitor
Take the call on the handset of the phone.
This conversation will not be heard on the
Loudspeaker. Any other user with a Speech
Monitor DN on their set can enter the call
by establishing a Multiple Appearance
Conference.
To disconnect a call from the Speech
Monitor:
Replace the handset or press Release
while the call is active.
To disconnect from the Speech
Monitor:
Switch off the Speech Monitor.
During a call: On Hold on Loudspeaker