PYLE Audio PLTVD7IN - Manual (Page 14)

12
1. Connecting to Power System
Connecting to Power & Multi Channel AV Control Unit System
The illustration below is showing power system connection. Please also refer to the
owner s and installation manuals supplied with the associated equipment. If it doesn t
have corrected connection, it may cause unexpected damage.
1-1. HEAD UNIT
Notice
Make sure the connection of Parking Brake wire. If it has no connection, the unit will
not show any picture.
Connect the Dimmer wire, otherwise its illumination on button will not be lit.
When using the optional power amplifier, connect to Amplifier s power control terminal
with Power Control Wire.
Depending on what antenna you are using, connect auto antenna wire either to the
control terminal of the motor antenna or to the power terminal for the film-type antenna.
1-2. RT BOX (Multi Channel AV Control Unit System)