PYLE Audio PLTVD7IN - Manual (Page 16)

14
3. Connecting to Multi Channel AV Control Unit System
The Illustration below is just possible examples with our Multi Channel AV Control Unit
System only. The exact connection method will vary depending on the specific
components selected for a particular installation.
Please also refer to the owner s and installation manuals supplied with the associated
equipment.
Don’t use both AV2 and DVD/ VCD Changer Input at the same time because
it is linked each other. It can be used either only for AV2 or only for DVD/ VCD
Changer Input.
NOTICE
Make sure that power is off before making signal connections.
Connect this Unit Mi-Net output directly to the Mi-Net input of the RT BOX.
In Case of Using Sub woofer, you must use additional Power Amplifier with Sub woofer
Line out.
WARNING
Do not use the Digital Audio Output of this Unit unless you are connecting it to a suitable
Dolby Digital and/or DTS decoder or to an amplifier equipped with a digital audio input. High
volume digital signals may damage your equipment and your hearing.
Connecting to Power & Multi Channel AV Control Unit System