PYLE Audio PLTVD7IN - Manual (Page 26)

24
TUNING (TV-AUTO SEARCH)
1. After adjust TV system(Field/Standard)
on Pre-Adjust, Press P.S/BSM to search
TV channels.
* ‘Searching’ will be blinking as it searches
TV channels and channel number is
changing as it searches TV channels.
2. W h e n A u t o - S e a r c h i s c o m p l e t e d ,
memorized channels will be shown on
the screen and cursor will be placed on
the first channel as below. The next
channels will be shown on the next screen
by pressing BAND button.
TUNING (RADIO-AUTO SEARCH)
1. After adjust Radio system (Band/Freq.
Step) on Pre-Adjust, press P.S/BSM to
search RADIO channels.
* ‘Searching’ will be blinking as it searches
Radio channels and channel number is
changing as it searches RADIO channels.
2. W h e n A u t o - S e a r c h i s c o m p l e t e d ,
memorized channels will be shown on
the screen and cursor will be placed on
the first channel as below. The next
channels will be shown on the next
screen by pressing BAND button.
OVERVIEW OF THE RDS FUNCTION
AF (Alternative Frequencies) / REG
(Regional)
When pressed short, AF switching mode
is selected and the state of AF switching
mode is displayed by AF segment in LCD.
Segment off : AF switching mode off
Segment on : AF switching mode on : Has
RDS information.
Segment flashing : AF switching mode is
selected, but RDS information is not
received yet.
When AF switching mode is selected, the
radio checks the signal strength of the AF
all the time. The interval of checking time
of each AFs depends on the signal
strength of current station, from a few
minute for strong station to a few seconds
for weak station.
Every time that new AF is stronger than
current station, it switches over to that
frequency in short time. Because the mute
time of AF switching or checking time is
very short, it is almost inaudible in case of
normal program.
When pressed long, it is activated of
regional mode on/off.
Regional mode on : AF switching or PI
SEEK is implemented to the station which
has all PI codes are the same as current
station. REG of individual segment is
turned on also together with displaying
"REG ON" on numeric display for a few
seconds.
BASIC OPERATION