Pacific Digital DrumXtreme - Manual (Page 44)

Copyright© 2003 Pacific Digital Corporation
Page 41
Q2: When using the software, the images appear, but no sound can
be heard.
A2:
1. Check the connection of your computer speakers to your
computer sound card.
2. Check the volume settings on your computer volume
control.
i. Go to Start, Settings, Accessories,
Entertainment
ii. Click on Volume Control
iii. Verify that the volume control settings for each
device are adjusted to the desired level.
iv. Verify that the Volume Control, Wave and CD
Audio are not muted.
3. Verify that the computer Sound Card is properly
installed.
a. Go to Start, Settings, Control Panel
b. In control panel, double click on Sounds and
Multimedia.