Panasonic AG-HPX500E - Manual (Page 122)

122
Setup menu list
C
h
ap
te
r 7 M
en
u O
p
er
at
io
n
s
SW MODE screen
Item Description of settings (Items in bold are factory settings.)
MID GAIN Sets the gain value assigned to the M position of the GAIN switch.
●
0 dB, 3 dB, 6 dB, 9 dB, 12 dB
HIGH GAIN Sets the gain value assigned to the H position of the GAIN switch.
●
0 dB, 3 dB, 6 dB, 9 dB, 12 dB
W.BAL.PRESET Sets the color temperature assigned to the PRST position of the WHITE BAL switch.
●
3.2 K / 5.6 K
USER MAIN
Selects the function assigned to the USER MAIN button.
●
REC CHECK: Performs Rec Check.
● SPOTLIGHT: Auto iris control for the spotlight ON/OFF
● BACKLIGHT: Auto iris control for the backlight compensation
● BLACKFADE: Blackfade
● WHITEFADE: Whitefade
● GAIN: 18 dB:
• Press the button to set the gain value to 18 dB. This setting takes effect with the 60i and 60P recording
formats only. It is not valid when the recording frame rate is less than 22 fps or when the slow shutter
mode (1/15) is established.
• When the gain value is set to 18 dB or set from 18 dB to another value, the image can be disordered
for a moment.
● TEXT MEMO: Text memo recording
● SLOT SEL: Selects one of the P2 card slots.
● SHOT MARK: Shot mark recording
● LVL METER: Displays the level for channels other than those set in the menu.
● MARKER: Displays markers.
● LCD REV: Displays an upside down and reversed image on the LCD.
USER1 Selects the function assigned to the USER1 button. The settings are the same as USER MAIN above.
Factory setting: BACKLIGHT
USER2 Selects the function assigned to the USER2 button. The settings are the same as USER MAIN above.
Factory default: LVL METER