Panasonic DVD-RP56 - Manual (Page 21)

21
Advanced operations
RQT6012
Options
English French Spanish Original Other ¢¢¢¢
Automatic English French Spanish Other ¢¢¢¢
English French Spanish Other ¢¢¢¢
Setting ratings (When level 8 is selected)
8 No Limit: All DVDs can be played.
1 to 7:
Prohibits play of DVDs with corresponding
ratings recorded on them.
0 Lock All: Prohibits play of all DVDs.
Changing ratings (When level 0–7 is selected)
Unlock Player
Change Level
Change Password Temporary Unlock
4:3 Pan&Scan 4:3 Letterbox 16:9
Automatic Field Frame
Lighter: when connected to a TV through the VIDEO OUT
or S VIDEO OUT terminal.
Darker: when connected to a TV through the
COMPONENT VIDEO OUT (Y/P
B
/P
R
) terminals.
No Yes
Bitstream PCM
Off Bitstream
Off On
On Off
English Français Español
On Off
Off On
Items
Audio
Choose the preferred audio language.
Subtitle
Choose the preferred subtitle language.
Menus
Choose the preferred language for disc menus.
Ratings
Set a ratings level to limit DVD play.
³ The password screen is shown if you choose levels 0 to 7 or if
you choose “ Ratings” when levels 0 to 7 have been selected
(
á page 22).
³ Select “Level 0” to prevent play of discs that do not have ratings
levels recorded on them.
TV Aspect
Choose the setting to suit your television and preference
(
á page 7).
Still Mode ( á [Remarks] below)
Specify the type of picture shown when paused.
Black Level Control
Change the black level of the picture if you connected a television
through the COMPONENT VIDEO OUT terminals.
PCM Down Conversion [DVD]
Digital output of 96-kHz linear PCM signals ( á page 22)
Dolby Digital [DVD]
Digital output of Dolby Digital signals ( á page 22)
DTS Digital Surround [DVD]
Digital output of DTS Digital Surround signals ( á page 22)
D. Range Compression [DVD] (Dolby Digital only)
Change the dynamic range for late night viewing.
Dynamic range is the difference between the loudest sound and
the softest sound. By compressing this range, you can listen at
low volume but still enjoy clear dialogue.
Audio during Search [DVD] [VCD]
Choose whether to have sound during search.
Menu Language
Choose the preferred language for these menus and the on-
screen messages.
On-Screen Messages
Choose whether to show on-screen messages or not.
Demo
A demonstration of the unit’s on-screen displays starts when you
select “On”. The demonstration stops when you press a button
and the setting reverts to “Off”.
Menus
Disc
[DVD]
( á
[Remarks]
below)
Video
[DVD]
[VCD]
Audio
Display
Others
Summary of initial settings
This chart shows the initial settings for this unit. See page 20 for details on menu operation.
³ Underlined items are the factory presets.
³ The menu and on-screen message language has been factory preset to English. You can change the language by going to “Menu Language” in
the Display menu.
Remarks
º Disc—Audio, Subtitle and Menus
“Original”: The original language of each disc will be selected.
“Other ¢¢¢¢ ”: Input a code number with the numbered buttons ( á page 22).
“Automatic”: If the language selected for “Audio” is not available, subtitles of that language will automatically appear if available on that disc.
³ Some discs are designed to start in a certain language despite any changes you make here.
º Video—Still Mode
Automatic: The unit automatically selects field still or frame still.
Field:
Less blurred field stills are shown. Select if jittering occurs when “Automatic” is selected.
Frame: Sharper frame stills are shown. Select if small text or fine patterns cannot be seen clearly when “Automatic” is selected.