Panasonic DVD-RP56 - Manual (Page 23)

23
Home Theater
RQT6012
PCM Down Conversion
Select “No”.
What you want to do
Home Theater
–Enjoying more powerful sound
This unit can play Dolby Digital, but only in two channels. This unit does not have a DTS decoder. You must connect a unit with a Dolby Digital or
DTS decoder to enjoy surround sound.
Use analog connection to enjoy audio recorded with high sampling frequencies (over 48 kHz). To protect the rights of the producers of
this kind of material, this audio will be down-sampled to 48 kHz if you use digital connection.
To enjoy 5.1-channel surround
sound
To enjoy stereo or Dolby Pro
Logic
Settings
Reference
page
[Digital\connection]
Connect to an amplifier with
built-in decoder or a separate
decoder-amplifier
combination.
23 [A] PCM Down Conversion
Select “Yes”.
Dolby Digital
DTS Digital Surround
Settings depend on your
decoding equipment.
Make the speaker settings on
the amplifier or decoder.
22
–
[Analog\connection]
Connect to an analog amplifier
or system component.
24 [B]
24 [C] [Digital\connection]
Connect to a digital amplifier or
system component.
PCM Down Conversion
Select “Yes”.
Dolby Digital
Select “PCM”.
DTS Digital Surround
Select “Off”. 22
Reference
page
How to do it
22
BASS PLUS
Select “ON”. To enjoy heavy bass with a
subwoofer Connect an active subwoofer. 24 14
OPTICAL
L
R SUB-
WOOFER
AUDIO OUT VIDEO
OUT
S VIDEO
OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
OPTICAL
Back of the unit
Amplifier
Optical digital audio cable
Do not bend when connecting.
Insert fully, with
this side facing
up.
Adjust the settings to suit the equipment you have connected (
á
“Digital output” page 22).
Note
You cannot use DTS Digital Surround decoders not suited to DVD.
Speakers
You can enjoy surround sound by connecting from
three to six speakers.
Example: Six speakers
º Other uses
Recording to MDs or cassette tapes ( á page 24).
Note
³ The equipment connections described are examples.
³ Peripheral equipment and optional cables sold separately unless otherwise indicated.
³ Before connection, turn off all equipment and read the appropriate operating instructions.
»
A Connecting an amplifier with a built-in decoder or a decoder-amplifier combination