Panasonic DVD-RP56 - Manual (Page 24)

Home Theater
RQT6012
24
OPTICAL
L
R SUB-
WOOFER
AUDIO OUT VIDEO
OUT
S VIDEO
OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
OPTICAL
L
R SUB-
WOOFER
AUDIO OUT
VIDEO
OUT
S VIDEO
OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
OPTICAL
R
L
AUX IN
Connecting an active subwoofer (optional)
You can enjoy more powerful bass by connecting an active subwoofer.
Recording to MDs or cassette tapes
OPTICAL
L
R SUB-
WOOFER
AUDIO OUT VIDEO
OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
Audio cable
To the subwoofer’s
input terminal
To make a digital recording
1. Connect the recording equipment with an optical digital audio ca-
ble ( á [C] above).
2. When recording DVDs, change the digital audio output settings.
ADVANCED SURROUND (V.S.S.) : OFF ( á page 14)
PCM Down Conversion: Yes ( á page 22)
Dolby Digital: PCM ( á page 22)
DTS Digital Surround: Off ( á page 22)
º Analog recording
You can record to an MD or cassette tape.
Using analog connection means sound will be unaffected by the copy
guards found on DVDs.
To make an analog recording
Connect the recording equipment with an audio cable (
á [B] above).
º Digital recording
You can record the digital signal directly onto an MD.
The signals on DVDs will be converted to 48 kHz/16 bit linear PCM.
Ensure the following conditions are met.
³ There is no copy guard recorded on the disc.
³ The recording equipment can handle a sampling frequency of
48 kHz/16 bit.
Amplifier or system component
Audio cable
Back of the unit
Optical digital
audio cable
Do not bend
when connecting.
³ Select “No” in “PCM Down Conversion” ( á page 22). Adjust the settings to suit the equipment you have con-
nected (
á
“Digital output” page 22).
Back of the unit
To enjoy Dolby Pro Logic
³ If you connect an amplifier that can decode Dolby Pro Logic, you will also need to connect center and surround speakers to enjoy surround
sound. Read the instructions for the equipment for connection details.
³ Turn Advanced Surround and Bass Plus off ( á page 14). Dolby Pro Logic will not function correctly if Advanced Surround or Bass Plus is
on.
³ Place the subwoofer as close as possible to the front center.
³ Turn BASS PLUS on to boost the output from the subwoofer
(
á page 14).
³ Adjust the volume on the subwoofer to suit your preference.
Insert fully, with
this side facing
up.
Home Theater– Enjoying more powerful sound
»
B
Connecting an analog amplifier or
system component
Audio cable
White (L)
Red (R)
»
C
Connecting a digital amplifier or
system component