Paradyne FrameSaver SLV 9664 - Manual (Page 9)

vii 9664-A2-GB20-00 March 2000
About This Guide
Purpose and Intended Audience
This document contains information needed to properly set up, configure, and
verify operation of FrameSaver SLV 9664 units with Service Level Verifier (SLV)
functionality designed for ISDN leased line applications. The unit is intended for
use at sites where access is at either 64 kbps or 128 kbps.
This guide is intended for system designers, engineers, administrators, and
operators. You must be familiar with the functional operation of digital data
communications equipment and frame relay networks.
Document Organization
Section Description
Chapter 1 About the FrameSaver SLV 9664. Identifies how the
FrameSaver SLV unit fits into Paradyne’s SLM solution,
and describes the features of the unit.
Chapter 2 User Interface and Basic Operation. Shows how to
navigate the user interface.
Chapter 3 Configuration. Provides configuration information for the
FrameSaver SLV unit.
Chapter 4 Security and Logins. Provides procedures for controlling
access to the FrameSaver SLV and setting up logins.
Chapter 5 Operation and Maintenance. Provides procedures to
display unit identification information and perform file
transfers, as well as how to display and interpret status
and statistical information.
Chapter 6 Troubleshooting. Provides device problem resolution,
alarm, and other information, as well as troubleshooting
and test procedures.