PYLE Audio PLTVATSC1 - Manual (Page 17)

Analog CC
The analog CC sub-menu provides the option of selecting which CC service should be used for
the analog CC text display window. The default setting, CC1, is the correct service for almost all
cases.
After accessing the Caption sub-menu, use the navigation buttons to highlight the CC
option, and press the ENTER button to select it. The analog CC window will appear, as shown
in Figure 14 below. A dot will appear to the left of the current CC service selection.
Figure 14. Analog CC Window
Use the navigation buttons to highlight the desired CC service, and press the ENTER
button to select it. The four service options are:
• CC1 - the primary caption service that synchronizes the captioning language with
the sound, used by most broadcasters. Captioning is displayed in the same language
as the program’s dialog.
• CC2 and CC4 - the special non-synchronous caption services that do not need to be in
sync with the sound and may provide simplified captioning, which is usually delayed.
These are rarely available and are used only in special conditions, such as when CC1
and CC3 are not available.
• CC3 - an alternate captioning service channel. Captioning is often a secondary language
translation such as French, Spanish, simplified English or displayed at a slower rate.
16
4. Menu Operation