PYLE Audio PLTVATSC1 - Manual (Page 35)

Specifications
Product: DTV Box for ATSC to NTSC
Connecting Jacks ANT IN: F connector (75 ohm)
RF Input: DTV standard ATSC
Output:
Video 1-pin RCA jack, 1Vpp, 480i composite
Analog Audio 2-pin RCA jack (Left & Right), 450 mVrms (100k ohm)
Input:
Video 1-pin RCA jack, 1Vpp, 480i composite
Analog Audio 2-pin RCA jack (Left & Right), 10 dBs, (10k ohm)
Channel Coverage: Terrestrial: 2-69
Power Source: DC12~24 Volts +/-0.5 %
Negative Earth
Power Consumption: 6W (Power on),
Less than 300 mW (Power off)
Operating Condition: Approx. 41 F° (5 C°) - 176 F° (80 C°)
Board Dimensions: Approx. 218 x104 x 24 mm
8.58 x 4.09 x 0.95 inch
Weight: Approx. 15.16 oz. (430 g)
(LxWxD)
NOTE
Designs and specifications are subject to change without prompt notice.
Weight and dimensions shown are approximate.
34
5. Reference
WARNING! HAZARD!
Do not operate this unit unless vehicle
is packed in safe and Legal area