PYLE Audio PLTVATSC1 - Manual (Page 9)

Initial Setup
After the install connections have been made, and the unit has been powered up, a blue
screen should be seen on the monitor screen. Pressing the MENU button on the remote
control should display the main menu on the screen, as shown in Figure 1 below. In this User
Guide describes the procedures for basic TV operations such as scanning for channels,
changing channels, language control, and information display.
Basic Operation
This chapter will describe the steps required for basic operation of the DTV box, including
performing the initial channel scan, changing channels, language control, and information
display. Please refer to Page 5 for a description of the DTV box remote control button functions.
Initial Channel Scan
1. To perform a channel scan when the input is from a terrestrial antenna, click the MENU button
on the DTV remote control, and using the navigation buttons, highlight the Channel menu
button and select it by pressing the ENTER button. Select the Auto Program sub-menu, then
select Yes in the Warning text window, as shown in Figure 2 below.
Figure 1. Main Menu
Figure 2. Auto Program Sub-Menu
3. Basic Operation
8