Palsonic VCR2120 - Manual (Page 12)

Normal timer recording
For timer recordings, clock, date, and stations must be set correctly.
Load a cassette with its safety tab in place
(see page 13) and with sufficient free space for the recording.
Call the video's "MAIN MENU",
choose "Timer Program".
Decide if you want to record
"Once", "Weekly" or "Daily" ...
... and confirm.
Type in one after the other.
The programme location
number,
the time the broadcast starts,
the time the broadcast ends,
the day of the broadcast, if it
is not today.
Select LP if you wish to make
a very long recording.
If you wish to make changes:
Move to the position you want to
change using the buttons.
Change the setting using the PR+/- or
number buttons.
If all setting are ok, press or till
you see "OK : confirm" in the bottom
line.
Confirm.
Switch your video off.
Wait a few seconds after typing a one-digit-number
If you have made a mistake, move to the position you want to change
using the buttons and change the setting
If programme timings overlap, the machine will give a warning
message If you don't adjust the times, the machine will record the first
programme completely then continue with the second one
If there is no sufficient free space for the recording on the cassette the
video switches automatically to "LP" for double recording capacity
The recorder will eject cassettes which have the safety tab removed
(page 13).
M O R E
f u n c t i o n s
10