Palsonic VCR2120 - Manual (Page 14)

Accessing counter zero position
Remaining time and cassette length
Clock / counter display
The counter counts in real time from the point you load the cassette This does not
have to be its beginning! The counter does not count unrecorded parts of the tape
If you rewind beyond the zero position, the counter counts in negative values
(e.g.- 0:01:15)
1x: Time and datetcurrent
status Time and date
Counter + current status
counter
disappear
If didn't wind tape (PLAY, FF, REW,...)
it doesn't appear the tape remain
time.
Call the video's "MAIN MENU", choose "Tape Control".
When you want the video to show the time remaining from the current video
tape position (to find out if there is sufficient space for a recording, for
example).
To ensure the remaining time shown is accurate, select the length of cassette
currently loaded by selecting this function until you reach the correct length.
Remaining time display is only possible when the cassette is loaded
The video will wind to the
position 0:00:00 and stop.
12
Reset the counter
2x:
3x:
Resetting the counter to zero
M O R E
f u n c t i o n s