Palsonic VCR2120 - Manual (Page 13)

Setting time and date
Call the video's "MAIN MENU",
choose "Timer Program
Select the programming to change or erase.
If you want to erase this programming press
button 0, confirm with OK.
If you wish to make changes:
Move to the position you want to change using
the buttons.
Change the settings using the PR +/- or number
buttons.
If all setting are ok, press or till you see
"OK: confirm" in the bottom line.
Confirm changes with OK. Exit the menus.
Call the video's "MAIN MENU",
choose "VCR Setup", then "Clock Set"
Move to the position you want to change and
type in the new values.
Wait a few seconds after typing a one-digit number
Store with OK button and exit with MENU button.
11
f u n c t i o n s
M O R E
Timer Review - changing and erasing