Using the mc protector/nd filter – Panasonic DMC-FZ30GN User Manual

Page 123

Advertising
background image

Others

123

VQT0S12

Using the MC Protector/ND Filter

The MC protector (DMW-LMC55; optional)
is a transparent filter which affects neither
the colours nor the amount of light, so it
can always be used to protect the camera’s
lens.
The ND filter (DMW-LND55; optional)
reduces the amount of light to
approximately 1/8th (equal to adjusting the
aperture value 3 increments) without
affecting the colour balance.

1 Remove the lens cap.

2 Attach the MC protector 1 or the

ND filter

2.

• You cannot attach the MC protector and

the ND filter at the same time.

• Do not hold the MC protector/ND filter too

tightly.

• When taking pictures with the flash using

the MC protector or ND filter, vignetting
effect may occur.

• If the MC protector/ND filter are dropped,

they may be destroyed. Be careful not to
drop them when attaching them to the
camera.

• You can attach the lens hood when the

MC Protector and ND Filter are attached.

• Detach the MC Protector and ND filter

before attaching the conversion lens.

• MC

u“Multi-coated”

ND

u“Neutral Density”

Advertising