Panasonic DMC-FZ30GN - Manual (Page 80)

Recording Menu Settings
80
VQT0S12
∫ Setting the White Balance manually
(White set )
Use this mode when you want to set the
white balance manually.
1 Set to [
] (White set), select
[ WHITE SET 1] or
[ WHITE SET 2] and then press 1.
2 Aim the camera at a sheet of white paper
or a similar white object so that the frame
in the centre is filled by the white object
only and then press
1.
∫ Finely Adjusting the White Balance
(White Balance Fine Adjustment )
When you cannot acquire the desired hue
by setting the white balance, you can adjust
the white balance finely.
1 Set the white balance to [ ]/[ ]/
[ ]/[ ]/[ ]/[ ]. (P79)
2 Press 3 ( ) several times until
[WB ADJUST.] appears.
3 Finely adjust the white balance.
• 1 [BLUE]: Press when the hue is
reddish.
• 2 [RED]: Press when the hue is
bluish.
About the white balance
• In auto mode [
], the white balance is
fixed to [AUTO].
• When taking a picture with the flash, the
white balance will be automatically
adjusted [except for [
] (Daylight) and
[ ] (Flash)], but the white balance may
not be properly adjusted if the flash level
is insufficient.
About the white balance fine adjustment
• The white balance icon on the screen
turns red or blue.
• You can set the value independently for
each of the modes in white balance.
• The setting on the fine adjustment of the
white balance is reflected to the picture
when taking a picture with the flash.
• When you set the white balance using the
White set [ ], the adjustment level is
set to “0”.
• When the colour effect is set to any of
[COOL], [WARM], [B/W] or [SEPIA] (P88),
you cannot finely adjust the white balance.
WHITE SET
SET CANCEL MENU
WHITE SET
EXIT MENU SELECT
WHITE SET 2
WHITE SET 1
BLUE RED
WB ADJUST.
SELECT EXIT