Panasonic DMC-FZ30GN - Manual (Page 56)

Recording pictures (basic)
56
VQT0S12
Taking Pictures using Burst Mode
1 Select the burst mode.
: High speed
;
: Low speed
;
: Unlimited
¢ 1
;
No display: cancelled
¢1 Depending on the memory size,
battery power, picture size and
quality (compression)
• Hold down the shutter button fully to
activate the burst mode.
∫ Number of pictures recorded in burst
mode
¢2 The burst speed is constant regardless
of the transfer speed of the card.
• When the shutter speed is higher than
1/60 and the flash is not activated.
• When the burst mode setting is set to
Unlimited
– You can take pictures until the capacity
of the card becomes full.
– Depending on the transfer speed of the
card, the burst speed may become
slower halfway.
• The focus is fixed at taking the first
picture.
• When using the self-timer or an extra flash
with burst mode, the number of recordable
pictures is fixed at 3.
• When the burst mode is activated, [AUDIO
REC.] cannot be used.
• When the flash is activated or [STARRY
SKY] (P76) in scene mode is selected,
you can take only 1 picture.
• When setting auto bracket and the burst
mode simultaneously, auto bracket will be
performed.
• You cannot take pictures in burst mode
when the quality is set to [TIFF] or [RAW].
SCN 1 SCN 2
5
Burst speed
(pictures/
second)
Number of recordable
pictures (pictures)
3
¢2
max. 5 max. 9
2
¢2
max. 5 max. 9
approx. 2
Depends on remaining
capacity of the card